Vertiv VR3100TAA handleiding

30 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 13 van 30
4 Installation and Assembly Procedures
Once your rack is in its final location, refer to the following procedures to install accessories, adjust components, and load
equipment into the rack.
The following tools ship with the rack for installation assembly:
cage-nut install tool
T30 extension drive
4.1 Removing and Reversing Doors
Rack doors are removable for convenience when installing or maintaining equipment. The front door is also reversible, so that
the single door may be opened in a more convenient direction if the rack is near a wall or other equipment.
To remove a door:
Doors are supported by two hinges and held in place by gravity. They can be lifted off and reinstalled without tools.
NOTE: Doors are easier to remove if they are open at a 90° angle to the rack.
To reverse the front door:
1. Disconnect the ground wire that is attached to the door and frame.
2. Lift the door off the rack, the loosen and remove screws from both the top and bottom hinges, shown in Figure 4.1
on the next page .
3. Remove the hinges and place them on the opposite side of the frame in the slots provided.
4. Reinsert and tighten the screws.
5. Remove the hardware from the door catch and install the catch on the opposite side of the frame.
6. Flip the door.
The hinge pin assemblies are now at the bottom of the hinge-pin attachment point.
7. Remove the hardware, flip the hinge pin and reinsert it in the hinge-pin attachment point.
4 Installation and Assembly Procedures
9
Vertiv™ VR Installer/User Guide

Bekijk gratis de handleiding van Vertiv VR3100TAA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVertiv
ModelVR3100TAA
CategorieNiet gecategoriseerd
TaalNederlands
Grootte4208 MB

Caratteristiche Prodotto

Kleur van het productBlack, Transparent
Gewicht127000 g
Breedte600 mm
Diepte1100 mm
Hoogte2000 mm