Veritas Power Stitch 21 DENIM handleiding
Handleiding
Je bekijkt pagina 50 van 56
50
Trouble shooting guide
Problem Cause Correction
Reference
page
Upper thread
breaks
1. The machine is not threaded
correctly.
1. Rethread the upper thread.
17
2. The thread tension is too tight. 2. Reduce the thread tension (to lower
number).
25
3. The thread is too thick for the
needle.
3. Select a larger needle size.
22
4. The needle is not inserted correctly. 4. Remove and reinsert the needle (at
side towards the back).
21
5. The thread is wound around the
spool holder pin.
5. Remove the reel and wind up the
thread onto the reel.
17
6. The needle is damaged. 6. Insert a new needle.
21
Bobbin thread
breaks
1. The bobbin case is not inserted
correctly.
1. Remove and reinsert the bobbin
case thread anew, according to
description.
16
2. The bobbin case is threaded
wrongly.
2. Check that bobbin and bobbin case
are in correct position.
16
Skipped stitches
1. The needle is not inserted correctly. 1. Remove and reinsert the needle (at
side towards the back).
21
2. The needle is damaged. 2. Insert a new needle.
21
3. The wrong size needle has been
used.
3. Choose a needle to suit the thread.
22
4. The presser foot is not attached
correctly.
4. Check and attach it correctly.
23
5. The machine is not threaded
correctly.
5. Rethread the upper thread.
17
Needle breaks
1. The needle is damaged. 1. Insert a new needle.
21
2. The needle is not correctly inserted. 2. Insert the needle correctly (at side
towards the back).
21
3. Wrong needle size for the fabric. 3. Choose a needle to suit the thread
and fabric.
22
4. The wrong presser foot is attached. 4. Select the correct presser foot.
23
5. The needle clamp screw is loose. 5. Use the screwdriver to tighten the
screw.
21
6. The presser foot is not appropriate
for the type of stitch that you sew.
6. Attach appropriate presser foot for
the type of stitch that you sew.
23
7. The upper thread tension too tight. 7. Loosen the upper thread tension.
25
Loose stitches
1. The machine is not correctly
threaded.
1. Check the threading and rethread.
17
2. The bobbin case is not threaded
correctly.
2. Thread the bobbin case as
illustrated.
16
3. Needle/fabric/thread combination is
wrong.
3. The needle size must suit the fabric
and thread.
22
4. The thread tension is wrong. 4. Correct the thread tension.
25
Before calling for service, check below trouble shooting guides in advance, if problem still exist, please
contact nearest dealer or local service center.
Bekijk gratis de handleiding van Veritas Power Stitch 21 DENIM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 21 DENIM |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
