Veritas Power Stitch 21 DENIM handleiding
Handleiding
Je bekijkt pagina 37 van 56
37
Making a buttonhole on stretch fabrics
When sewing buttonholes on stretch fabric, hook
heavy thread or cord under the buttonhole foot.
Attach the buttonhole foot and hook the gimp thread
onto the back of the presser foot.
Bring the two gimp thread ends to the front of the foot
and insert them into the grooves, then tie them there
temporarily. Lower the presser foot and start sewing.
The zig-zag should sew over the heavy thread or cord.
Once sewing is completed, pull the gimp thread gently
to remove any slack, then trim o any excess.
1
Back side
Note:
It is suggested that you sew with a stabiliser material
under the fabric.
v
Left and right side balance for
buttonhole
Stitch density on right and left sides of buttonhole can
be adjusted by buttonhole balance control adjuster.
This adjuster should usually be in a neutral position
(between "+" and "–").
If the stitches on the left side of the buttonhole are
too close together, then turn the dial to the left, which
opens up the stitches on the left side "+".
If the stitches on the left side of the buttonhole are to
sparse, then turn the adjuster to the right , which closes
in the stitches on the left side “-“.
Bekijk gratis de handleiding van Veritas Power Stitch 21 DENIM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 21 DENIM |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
