Veritas Power Stitch 21 DENIM handleiding
Handleiding
Je bekijkt pagina 36 van 56
36
4-Step Buttonhole stitch
Buttonholes can be adapted to the size of the button.
For stretch fabric or thin fabric, it is recommended to use a stabilizer for a better buttonhole sewing. Slightly reduce
upper thread tension to produce better results.
Note:
Before sewing a buttonhole on your project, practice
on a scrap piece of the same type of fabric.
Measure diameter and thickness of button and add
3mm for bartacks to obtain correct buttonhole length;
mark buttonhole size on fabric.
Place fabric under the foot, so that marking on the
buttonhole foot aligns with starting marking on fabric.
Lower the foot, so that the buttonhole center line
marked on the fabric aligns with the center of the
buttonhole foot.
①
1
Buttonhole size
②
2
Buttonhole foot center
③
3
3mm
1
3
2
5
Follow the 4-step sequence changing from one step
to another with the pattern selector dial. When moving
from step to step through the buttonhole process,
be sure that the needle is raised before turning the
pattern selector dial to the next step. Take care not to
sew too many stitches in steps 1 and 3.
Cut the center of the buttonhole being careful not to
cut any stitches on either side. Use a pin as a stopper
at the bar tack so you do not cut too much.
Note:
When cutting the buttonhole with the seam ripper,
do not place your hands in the cutting direction,
otherwise injuries may result.
Bekijk gratis de handleiding van Veritas Power Stitch 21 DENIM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Veritas |
| Model | Power Stitch 21 DENIM |
| Categorie | Naaimachine |
| Taal | Nederlands |
| Grootte | 13180 MB |
