VAX CLSV-HP handleiding
Handleiding
Je bekijkt pagina 16 van 20
16
Cleaning and maintenance
Removing and cleaning the motorised pet tool brushbar
WARNING: If the brushbar in the motorised pet tool is obstructed, the brushbar motor protection
sensor may activate. The brushbar will stop, the on/off power button will flash, and the machine
will switch off. To reset, first remove the tool from the flexi clean pole or handheld and clear any
obstruction. Wait 1 minute before refitting the tool. Switch the machine on. If the power button still
flashes check the filter or for blockages.
Push the brushbar release
tab clockwise to unlock.
Refit the brushbar and turn the brushbar lock anticlockwise
to lock.
Pull the brushbar out from
the brushbar housing.
To remove any threads or
hair, use a pair of scissors
to cut along the brushbar.
Clear any dirt/debris
inside the housing of the
floorhead.
Check the inlet for any
blockages and use a
blunt object to remove
the blockage.
SCAN HERE TO WATCH
OUR HOW-TO VIDEOS
visit www.vax.co.uk
for help and support with
setting up your machine
Bekijk gratis de handleiding van VAX CLSV-HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | VAX |
| Model | CLSV-HP |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 3983 MB |