VAX CLSV-HP handleiding

Handleiding

1234567891011121314151617181920/ 20

Afdrukken

Je bekijkt pagina 13 van 20

13

WARNING: If the filter is blocked, the on/off power button will flash and the machine will switch off.

Wash the pre-motor filter with warm water (40°C max) and leave for 24 hours or until fully dry

before refitting into the machine. For best cleaning results, filters should be tapped over a bin every

4-6 uses to remove dirt/debris, washed every 3 months and replaced every 9-12 months. Make sure

all filters are in place before using the machine.

Cleaning and maintenance

Push the tab upwards to

release the filter.

Lift the filter frame out of

the handheld.

Once fully dry, refit the

sponge filter into the frame

and slide it back into the

machine. Do not use the

machine without both filters

in place.

The filter will only fit one

way and the frame will sit

flush when correctly fitted.

Separate the sponge filter

from the filter frame.

Tap the sponge filter and

the frame over a bin to

remove any dirt and debris.

Wash both filter parts

under running water (40°C

max). Leave for 24 hours

or until fully dry before

replacing.

Cleaning and replacing the filter

SCAN HERE TO WATCH

OUR HOW-TO VIDEOS

visit www.vax.co.uk

for help and support with

setting up your machine

40°C

MAX

24hr

1234567891011121314151617181920/ 20

Bekijk gratis de handleiding van VAX CLSV-HP, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

Andere merken in Stofzuiger