Varytec Wind Up 85 kg TÜV handleiding
Handleiding
Je bekijkt pagina 15 van 24
1. Loosen safety screw [7] on the tube clamp of main tube [4]. Pull safety bolt [12] out of
square tube [8] and crank the square tube all the way down with crank [9].
2. Fix the square tube in place with safety screw [7].
3. Loosen safety screw [5] on the tube clamp of square tube [8]. Pull safety bolt [13] out of
upper extension tube [6] and crank the upper extension tube all the way down with
crank [9]. Do not crank down the extension tubes without a minimum load of 25 kg.
4. Fix the extension tube in place with safety screw [5].
5. Remove the spotlights. During disassembly, pay attention to an even weight distribution
to reach a centric load of the stand.
6. Loosen the safety screw of the mount and detach the truss beam.
7. Loosen safety screw [3] of the adjustable foot, pull out the corresponding safety bolt and
push the foot completely into the tube. Fix the position with safety screw [3].
8. Loosen safety screw [1] on the carriage. Pull safety bolt [11] out of main tube [4] and fold
up stand feet [2].
9. Fix the position with safety screw [1] on the carriage.
10. Pack the individual parts of the system in their original packaging if possible, and store
the package in a dry place protected against moisture.
Disassembly
Operation
Wind Up 85 kg TÜV
15
Lighting Stand
Bekijk gratis de handleiding van Varytec Wind Up 85 kg TÜV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | Wind Up 85 kg TÜV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1094 MB |
