Varytec Wind Up 85 kg TÜV handleiding
Handleiding
Je bekijkt pagina 14 van 24
3. In case of uneven ground, loosen safety screw [3] of the adjustable foot, pull out the cor‐
responding safety bolt and align the foot so that the stand is horizontal and stable on
the ground. Fix the position with safety screw [3].
4. Flange the truss beam onto the mount for the truss beam at the top end of stand [10]
and tighten the safety screw of the mount. Attach the spotlights. Pay attention to an
even weight distribution to reach a centric load of the stand. Never exceed the max‐
imum load of 85 kg specied for the stand.
5. Loosen safety screw [5] on the tube clamp of square tube [8]. Pull safety bolt [13] out of
upper extension tube [6] and crank the upper extension tube clockwise with crank [9]
until safety bolt [13] engages in the desired position in the upper extension tube.
6. Fix the extension tube in place with safety screw [5] on the tube clamp of square tube
[8].
7. Loosen safety screw [7] on the tube clamp of main tube [4]. Pull safety bolt [12] out of
square tube [8] and crank the square tube clockwise with crank [9] until safety bolt [12]
engages in the desired position in the square tube.
8. Fix the square tube in place with safety screw [7] on the tube clamp of main tube [4].
9. Turn crank [9] slightly anti-clockwise to avoid over-tensioning the wire rope.
Operation
14
Wind Up 85 kg TÜV
Lighting Stand
Bekijk gratis de handleiding van Varytec Wind Up 85 kg TÜV, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | Wind Up 85 kg TÜV |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1094 MB |
