Varytec Retro Blinder TRI 380 handleiding

48 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 21 van 48
7 Operation
7.1 Starting the device
Connect the device to the mains to start operation. The device is immediately operational.
The set values are retained during a power interruption.
7.2 Operating modes
This setting is only relevant when the device is controlled via DMX.
1. Press [MENU] repeatedly until ‘Address’ appears on the display.
2. Conrm with [ENTER].
3. Use [UP] and [DOWN] to select a DMX address between ‘001’ and ‘512’ .
4. Conrm with [ENTER].
ð
The chosen DMX address is saved.
Make sure that the DMX address number matches the conguration of your DMX controller.
The following table shows the highest possible DMX address for the various DMX modes.
Setting the DMX address
Operation
Retro Blinder TRI 380
21
Blinder

Bekijk gratis de handleiding van Varytec Retro Blinder TRI 380, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkVarytec
ModelRetro Blinder TRI 380
CategorieNiet gecategoriseerd
TaalNederlands
Grootte2647 MB