Varytec Retro Blinder OCTO 180 handleiding

Niet gecategoriseerd

Varytec

44 pagina's

PDF beschikbaar

Handleiding

7 Operation

7.1 Starting the device

Connect the device to the mains to start operation. The device is immediately operational.

The set values are retained during a power interruption.

7.2 Operating modes

This setting is only relevant when the device is controlled via DMX.

1. Press [MENU] repeatedly until ‘Address’ appears on the display.

2. Conrm with [ENTER].

3. Use [UP] and [DOWN] to select a DMX address between ‘001’ and ‘512’ .

4. Conrm with [ENTER].

The chosen DMX address is saved.

Make sure that the DMX address number matches the conguration of your DMX controller.

The following table shows the highest possible DMX address for the various DMX modes.

Setting the DMX address

Operation

Retro Blinder OCTO 180

Blinder

Bekijk gratis de handleiding van Varytec Retro Blinder OCTO 180, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.