Varytec bat.PAR V2 RGBWW handleiding
Handleiding
Je bekijkt pagina 28 van 80
7.3 DMX control
Each device must be assigned a DMX address if it is operated via a DMX controller. The device
will only react to control signals that are received on the set DMX address. To combine mul‐
tiple devices into a group, it is possible to assign the same DMX address to the relevant
devices.
In addition to the set DMX address, a device always occupies the number of DMX
channels that are set as DMX mode on the device. Other devices that will be con‐
trolled individually must always be assigned the next free DMX address according to
the channel assignment of other devices. Partial overlaps of channels can cause unin‐
tended eects.
Example:
If the rst device is set to the ‘Channel 02’ DMX mode with the DMX address 1, the
next device must be set to DMX address 3 or higher.
The rule is: DMX address of additional device = DMX address of rst device + DMX
mode
1. Press [MENU] to activate the main menu.
2. Press [UP] or [DOWN] repeatedly until the display shows ‘DMX’ . Conrm with [ENTER].
3. Press [UP] or [DOWN] repeatedly until the display shows ‘ADDRESS’ . Conrm with
[ENTER].
DMX address
Operating
28
bat.PAR V2 RGBWW, bat.PAR V2 RGBAM
LED Spotlight
Bekijk gratis de handleiding van Varytec bat.PAR V2 RGBWW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Varytec |
| Model | bat.PAR V2 RGBWW |
| Categorie | Verlichting |
| Taal | Nederlands |
| Grootte | 4890 MB |
