Valeton GP-200 handleiding
Handleiding
Je bekijkt pagina 22 van 56
20
With guitar amps (using FX Loop to pre-position the GP-200)
In this scenario, connect the GP- 200’s UNBALANCED OUTPUT to a guitar amp’s RETURN.
This way, by bypassing the preamp and using the power amp of the guitar amp to pair with dozens of refined eects in
the AMP module, you’ll get the more realistic sound.
If only one amp is available, please select the L (MONO) first.
To get the best tone performance, keep the CAB module o or turn on the "No CAB" mode to avoid adverse eects on the
tone.
With guitar amps (using FX Loop to post-position the GP-200)
In this scenario, all modules before the AMP (including the AMP module) will be muted, and the eect chain after the
AMP module will be applied between the preamp and the power amp. In default setting, RETURN node is after AMP
Module.
In order to get the best tone performance, keep the CAB module o or turn on the "No CAB" mode to avoid adverse
eects on the tone.
In addition, you need to pay attention to the GP-200’s patch volume monitor, if you hear the “clip” sound, please reduce
the input volume in the "Global - Input/Output”, or adjust the input to Line to try get the more ideal tone.
Application Scenarios
Bekijk gratis de handleiding van Valeton GP-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valeton |
| Model | GP-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8440 MB |
