Valeton GP-200 handleiding
Handleiding
Je bekijkt pagina 14 van 56
There are 3 footswitch modes: Patch mode, Stomp mode and User
mode. In each mode, all options are the same with varied default
settings. All functions will work immediately when selected and
presented. All changes will be saved automatically.
You can also click PARA to enter Footswitch Setting, and assign tap and
hold functions for each footswitch. By fast-selecting which footswitch
to assign functions, tap the corresponding footswitch.
Footswitch
This is for choosing footswitch modes and corresponding function settings.
Ÿ Quick Access Knob 1 is to choose Bank Select Mode. This setting
simultaneously aect internal and external footswitches and oers
two modes: Initial and Wait.
Initial: When switching banks, the patches will roll immediately.
Wait: The default mode. When switching banks, the patches will
NOT roll immediately, instead, you will need to enable footswitch
functions and select a confirmed patch number. After that, the
patches will switch.
Ÿ Quick Access Knob 2 is to enter Footswitch Setting (See picture
below).
Using GP-200 as an audio interface
When used as a USB audio interface, the GP-200 will be recognized by the system as a 6-in/4-out USB device. Here we will
show you how to use this function through listing two scenarios.
Scene 1: Using the built-in re-amp function in the DAW to record or adjust the tone
1. Set the Mono L and Mono R's output to "Dry" in the Global Settings-USB Audio
2. In the DAW, create two new Tracks A and B, and import/record a dry guitar Track in A
3. Set Track A output to Output 3-4, set Track B input to Input 3-4, keep Track B's monitoring o
4. Play the dry track in DAW, and now you can hear the eect sound of the processed dry track file in GP-200
5. Activate "Record" in Track B on the recording software, then you'll get to record the Track with eect after re-amp on Track B.
Scene 2: Using LOOPBACK function to record, combining the audio from multiple sources on your computer
1. In the DAW, create a new stereo audio track
2. Set the input to Input 5-6
3. Start recording in the DAW
4. By playing other audio sources on your computer, you can record them in the track now
Global Settings
12
Ÿ Turn Quick Access Knob 1 to select tap functions
Ÿ Turn Quick Access Knob 2 to select hold functions
Ÿ Turn Quick Access Knob 3 to turn pages between
single FS and dual FS settings.
We have a reset option in every mode to perform a
factory reset for all footswitches.
Reset
Footswitch
Patch Stomp User
FS 1 FS 2 FS 3 FS 4
FS 5 FS 6 FS 7 FS 8
Tap
Hold
Tap
Hold
BANK- BANK+ TAP
BANK- BANK+ TUNER
None None None
LOOPER
None
Single FS
Page
Display
Auto CAB Match
BankSel Mode
Wait
Setting
USB Audio
EXP CalibrateFootswitch
Input/Output
EXP 2/Footswitch
GLOBALSETTINGS
Single FS
Page
BANK-
Hold
BANK-
Tap
Bekijk gratis de handleiding van Valeton GP-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valeton |
| Model | GP-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8440 MB |
