Valberg WD 10714 A 10/D W180C Handleiding (144 Pagina's)

Handleiding

31

EN

Problem Check whether / Possible cause

Final spin results are poor. The washing machine has an imbalance detection and

correction system. If individual heavy items are loaded

(e.g. bathrobes), this system may reduce the spin speed

automatically or even interrupt the spin completely if it

detects too great an imbalance even after several spin

starts, in order to protect the washing machine.

• If the laundry is still too wet at the end of the cycle,

remove some articles of laundry and repeat the spin

cycle.

• Excessive foam formation may prevent spinning. Use

the correct amount of detergent.

• Check that the spin speed selector has not been set

to “0”.

If your washing machine

has a time display: the

programme time initially

displayed is lengthened /

shortened by a period of

time:

This is a normal capacity of the washing machine to

adapt to factors that can have an effect on the wash

programme time, e.g.:

• excess foam formation;

• load imbalance due to heavy items of laundry;

• prolonged heating time due to reduced inlet water

temperature;

Because of influences like these, the time remaining

in the programme run is recalculated, and updated

if necessary. In addition, during the filling phase,

the washing machine determines the load and if

necessary adjusts the initial programme time displayed

accordingly. During such update periods, an animation

appears on the time display.

Enter the after-sales query mode

1. In the shutdown state, press the “ ” + “ ” + switch the “ ” to enter the after-sales

inquiry mode;

2. It defaults to displaying the number of operation cycles;

3. Press “ ” to switch cycles/fault codes;

4. When querying fault codes, press the “ ” to page up and the “ ” to page down.

5. Turn the knob to “OFF”, wait for 3 seconds, you will exit query mode.

Cleaning and maintenance

C

Bekijk gratis de handleiding van Valberg WD 10714 A 10/D W180C, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.