Valberg ST3 handleiding
Handleiding
Je bekijkt pagina 7 van 50
6
EN
Product usage
B
Assembly
WARNING!
• Never use the product with empty water container (13).
•
Make sure the product is turned off, unplugged from the mains socket and
has already cooled down before assembling or disassembling.
To assemble:
1.
Insert the telescopic tube (3) into the top part of the main body (9) until it clicks into place .
2.
Release the clip lock on the telescopic tube (3) and extend the tube to your desirable
length. Then, fasten the clip lock to secure it in place .
3. Place the mop head (11) on the floor and insert the bottom part of the main body (9) onto
it. Then, place the cleaning cloth for hard floor or carpet (C) on the floor (with the cleaning
fibers facing downwards), and place the mop head (11) flat on top of the cloth and press
it down to secure it .
NOTE: Before cleaning (on hard floor), make sure that the cloth (C) fits and fully
covers the bottom surface of the mop head (11) to avoid damaging the floor or
the product.
Attach the carpet glider:
If you wish to clean the carpets, make sure that corresponding carpet cloth (C) and carpet
glider (D) are used.
•
Place the glider (D) on the floor with its hooks facing upwards and align it with the mop head
(11) and cleaning cloth for carpet (C). Press the mop head (11) downwards to lock it .
Remove the carpet glider:
If you have attached the carpet glider:
1. Place the product in vertical position.
2. Step on the glider’s tab (D) and lift the product upwards to separate them.
To disassemble:
1. To detach the mop head (11) from the main body (9), press the mop head release button
(10) and pull the main body (9) and the mop head (11) apart .
2.
To detach the telescopic tube (3) from the main body (9), release the clip lock on the
telescopic tube (3) and retract the tube completely. Fasten the clip lock on the tube (3)
to secure it in place.
3. Press the tube release button (4) and lift the tube (3) away from main body (9).
4. Grab the edge of the cloth (C) and peel it away from the mop head (11).
Bekijk gratis de handleiding van Valberg ST3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | ST3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3646 MB |
