Valberg ST3 handleiding
Handleiding
Je bekijkt pagina 12 van 50
11
EN
TIPS:
•
When the power cable (14) is wound around the hooks
(2 and 5), you should pull out the power cable under
the handle slightly and rotate the hook pointing to the
floor before next use. Then, you can take out the power
cable quickly.
•
For better cleaning results, we recommend you use
clean and dry cleaning cloth (C) each time you use the
steam mop. This is because using the cloth on unclean
surfaces, the cloth can spread the dirt around. It is
necessary to change the cloths frequently. Additionally,
after using the product for some time, the cloth (C) will
become wet and may leave wet stains on the floor. Make
sure you use clean, dry cloth before you start cleaning.
Self-cleaning
1. Switch off the product and unplug it from the mains supply.
2. Drain the water completely from the water container (13).
3. Mix one part of citric acid with three parts of water.
4.
Pour this mixture into the water container (13) via the water
inlet (12).
5. Plug the steam mop into the mains supply.
6. Rotate the steam intensity knob (7) to any steam mode (Low/
Medium/High) and long press (for about 5 seconds) the self-
cleaning button (8) until you hear a beep sound and the green
indicator light (6) starts flashing.
7.
The heating element will work during self-cleaning process.
The whole process will last around 30 minutes. At the last 10
minutes, the product will emit water and steam at the same
time.
Cleaning and maintenance
C
Bekijk gratis de handleiding van Valberg ST3, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | ST3 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3646 MB |
