Valberg 14S40 B XAD929C V2 handleiding
Handleiding
Je bekijkt pagina 13 van 168
11
EN
Back of dishwasher
Mains Cable
Drain Pipe
Water Inlet
Counter
Drain hose
Drain Pipe
How to drain excess water from hoses
If the connection to the drain pipe is positioned higher than 1000mm, excess water may
remain in the drain hose. It will be necessary to drain excess water from the hose into a bowl
or suitable container that is held outside and lower than the sink.
Water outlet
•
Connect the water drain hose. The drain hose must be correctly fitted to avoid water leaks.
• Ensure that the water drain hose is not kinked or squashed.
Extension hose
• If you need a drain hose extension, make sure to use a similar drain hose.
•
It must not be longer than 4 meters, otherwise the cleaning effect of the dishwasher
could be reduced.
Syphon connection
The waste connection must be at a height less than 1000mm (maximum) from the bottom
of the dishwasher.
Positioning the appliance
•
Position the appliance in the desired location. The back should rest against the wall behind
it, and the sides, along the adjacent cabinets or walls.
•
The dishwasher is equipped with water supply and drain hoses that can be positioned
either to the right or the left sides to facilitate proper installation.
Levelling the appliance
Once the appliance is positioned for levelling, the height of the dishwasher may be altered via
adjustment of the screwing level of the feet. In any case, the appliance should not be inclined
more than 2°.
Product usage
B
Bekijk gratis de handleiding van Valberg 14S40 B XAD929C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | 14S40 B XAD929C V2 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 15217 MB |
