Valberg 14S40 B XAD929C V2 handleiding
Handleiding
Je bekijkt pagina 11 van 168
9
EN
Installation instruction
Electrical Shock Hazard!
• Disconnect electrical power before installing dishwasher.
• Failure to do so could result in death or electrical shock.
WARNING!
The installation of the pipes and electrical equipments should be done by
professionals.
About power connection
WARNING!
For personal safety:
• Do not use an extension cord or an adapter plug with this appliance.
•
Do not, under any circumstances, cut or remove the earthing connection from
the power cord.
Electrical requirements
Please look at the rating label to know the rating voltage and connect the dishwasher to
the appropriate power supply. Use the required fuse 10A/13A/16A, time delay fuse or circuit
breaker recommended and provide separate circuit serving only this appliance.
Electrical connection
Ensure the voltage and frequency of the power being corresponds to those on the rating
plate. Only insert the plug into an electrical socket which is earthed properly. If the electrical
socket to which the appliance must be connected is not appropriate for the plug, replace the
socket, rather than using a adaptors or the like as they could cause overheating and burns.
WARNING!
Ensure that proper earthing exists before use.
Water supply and drain
Cold water connection
•
Connect the cold water supply hose to a threaded 3/4(inch) connector and make sure that
it is fastened tightly in place.
• If the water pipes are new or have not been used for an extended period of time, let the
water run to make sure that the water is clear.
Product usage
B
Bekijk gratis de handleiding van Valberg 14S40 B XAD929C V2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Valberg |
| Model | 14S40 B XAD929C V2 |
| Categorie | Vaatwasser |
| Taal | Nederlands |
| Grootte | 15217 MB |
