V-Tac HEC2-S6.0Hr2 handleiding
Handleiding
Je bekijkt pagina 11 van 64
•
•
•
•
•
07 Safety
•
•
•
User Manual
The installation place should be away from humid or corrosive
substance.
Authorized service personnel must use insulated tools when install-
ing or working with this equipment.
PV modules shall have an IEC 61730 class A rating.
Never touch either the positive or negative pole of PV connecting
device. Touching both of them at the same time is strictly prohibited.
Even after the grid, battery, and PV supply are disconnected, the
capacitors in the equipment may still hold a high voltage charge.
Hazardous voltage will present for up to 5 minutes after disconnec-
tion from power supply
CAUTION-RISK of electric shock from energy stored in capacitor,
never operate on the inverter couplers, the grid cables, battery cables,
PV cables or the PV generator when power is applied. After switching
off the PV, battery and grid supply, always wait for 5minutes to let the
intermediate circuit capacitors discharge before unplug DC, battery
plug and grid coupler.
•
Do not disassemble any parts of inverter which are not mentioned in
installation guide. It contains no user-serviceable parts. See warranty
instructions on obtaining service. Attempting to service the inverter
warranty.
Bekijk gratis de handleiding van V-Tac HEC2-S6.0Hr2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | V-Tac |
| Model | HEC2-S6.0Hr2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 5991 MB |
