USL LSS-200 handleiding
Handleiding
Je bekijkt pagina 8 van 34
4
TD-001538-01-A1
Log
Figure 2 shows a portion of a log page from the LSS-200. Logs use UTC time internally. UTC time is converted to local time at the LSS-200 and
local time at the user location when displaying logs. The time zone at the LSS-200 is entered on the configuration pages. The time zone at the user
location is determined by the web browser referencing the operating system. The browser determines whether Daylight Saving Time (Summer Time)
is in effect at the user location. This same determination is used to determine whether Daylight Saving Time is in effect at the LSS-200 location.
The configuration page allows Daylight Saving Time to be disabled at the LSS-200 location if Daylight Saving Time is not observed at that location.
Finally, you can click the time zone under “LSS Time” to toggle between standard and Daylight Saving Time.
Measurement descriptions are determined in the scripts that capture the measurements. In addition, the measurement capture commands allow
minimum and maximum values to be specified for each measurement. Measurements that are outside these limits are shown in red.
— Figure 2 — LSS-200 Log
Clicking a measurement description brings up a graph of that measurement over time as shown in Figure 3. The minimum and maximum values
specified in the script commands are plotted in red.
— Figure 3 — LSS-200 Graph
Bekijk gratis de handleiding van USL LSS-200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | USL |
| Model | LSS-200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6136 MB |
