USL JSD-60 handleiding
Handleiding
Je bekijkt pagina 27 van 44
184050 Page 27
screen for a given theater can be grouped for easier management of different locations
(theaters). Simple Network Management Protocol (SNMP) is available for monitoring multiple
units. The SNMP settings are available in the Global tab view.
GUI View of Multiple JSD-60s
The GUI main screen provides an overview of several JSD-60 systems. Systems are normally
broken into groups representing theaters. Each group contains the individual JSD-60 systems
for each auditorium. To setup the management of multiple units, they will need to be
configured with Theater Name or location and a screen number. Matching Theater Names will
be used to group the units for a location. The screen number is used for identifying a JSD-60
within a Theater or location (complex). See the JSD-60 Software User Manual for additional
information on viewing multiple JSDs in the GUI.
JSD-60 Web Interface
The JSD-60 includes a web server. The web server can be used to control the JSD-60, view the
current status of the JSD-60, view the log, and upload new firmware. See the JSD-60 Software
User Manual for additional information on the JSD-60 Web Interface.
SNMP Monitoring
The JSD-60 includes an SNMP agent that can be used with an SNMP network manager or MIB
browser to monitor the status of the JSD-60. The MIB describing the JSD-60 is located at
http://JSD-60/JSD60.MIB. Substitute the IP address of the JSD-60 for JSD-60 in the preceding
URL. At this time, the status of the JSD-60 can be polled using SNMP. View the MIB for the
details of what is currently supported.
JSDV-80 Remote Volume Control
The JSDV-80 remote volume control can be installed in an auditorium or other location. The
JSDV-80 includes a fader control knob that can be used to adjust the main fader level and an
interface wiring terminal that is used for fader up, down and power (+5 V and ground). The up
is connected to Automation Connector pin 9 and down on in 10. The +5 V is connected to pin 13
with the ground at pin 12. There is no need to use an external power source since it is available
on the DB25F connector on the rear of the JSD-60.
Bekijk gratis de handleiding van USL JSD-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | USL |
| Model | JSD-60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6052 MB |
