USL JSD-60 handleiding
Handleiding
Je bekijkt pagina 24 van 44
184050 Page 24
8.1 GUI INSTALLATION
The GUI runs under Windows® XP, Windows® 7, Windows® 8, or Windows® 10 operating
systems. Run the JSD-60 GUI installation program and follow the on-screen instructions. See the
JSD-60 Software User Manual for additional information on GUI usage.
Note: The USB driver needs to be installed after the GUI is installed. Follow the USB Driver
Installation instructions that are included in the JSD-60 Software User Manual.
Note: Windows XP installs a driver for a particular USB port and when connected to a different
port, the user must repeat the installation process. We suggest executing the install process on
all USB ports.
8.2 SET IP UTILITY
The Set IP utility allows the user to configure the network and host name settings on the JSD-
60. To run the utility go to USL > JSD-60 Cinema Processor > JSD60SetIP in the Windows Start
Menu.
• Connect the host computer to the USB port on the front of the JSD-60. The JSD-60 should
appear under the USB Device List. It is identified by which USB port it is connected to on the
host computer. Click the JSD-60 on the found list.
• Fill in the IP address, subnet mask, and gateway as dotted decimal values. Click Set IP to
save the values in the JSD-60.
• Fill in the network hostname for the JSD-60. The hostname can be up to 15 characters long
and cannot contain spaces. The hostname will be converted to upper case before being
saved. Click Set Name to save the value to the JSD-60.
Bekijk gratis de handleiding van USL JSD-60, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | USL |
| Model | JSD-60 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6052 MB |
