UniView IPC675LFW-AX4DUPKC-VG Handleiding (135 Pagina's)

Handleiding

125

 Trans-channel

Used to transmit data between the RS485 port and the third-party device.

NOTE!

This feature is not

available to all camera models.

(3) Set Port Mode to Trans-Channel.

(4) Enable Trans-Channel.

(5) Enter the destination address and port, that is, the IP address and port number of the third-party

device to which the transparent channel is connected.

(6) Click Save.

 OSD

Receive serial port information from the third-party device through the RS485 port and then overlay the

parsed information on the OSD.

NOTE!

In order for the camera to correctly parse the received serial port information, make sure the serial

port

information sent from the third-party device conforms to our data formats. Contact our technical

support for more information.

(1) Set Port Mode to OSD.

Bekijk gratis de handleiding van UniView IPC675LFW-AX4DUPKC-VG, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.