UniView IPC3638SE-ADF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

83

Monitoring

Type

Description

Monitoring Task Select to enable or disable the monitoring task.

Monitoring Task

Name

Enter a name for the monitoring task.

Cause of

Monitoring

Enter the cause of the monitoring task.

Monitoring Type

Select the monitoring type.

 All: The camera reports an alarm and performs the set alarm-triggered actions once it

detects a face.

 Match Alarm: The camera reports a match alarm and performs the set alarm-triggered

actions when the similarity between a captured face and a face in the monitored face

library reaches the confidence threshold.

 Not Match Alarm: The camera reports a not match alarm and performs the set alarm-

triggered actions when the similarity between a captured face and a face in the monitored

face library fails to reach the confidence threshold.

Confidence

Threshold

By default, the confidence threshold is set to 80. A match alarm/not match alarm occurs

when the similarity between a captured face and a face in the face library reaches/fails to

reach the threshold.

The higher the value, the more accurate the face recognition.

(3) Select the face library to be monitored.

(4) Set the alarm-triggered actions and arming schedule. See Alarm-triggered Actions and

Arming

Schedule for details.

(5) Click OK.

Click Save.

5.6.13 Human Body Detection

Human body detection detects humans in a specified area. The camera reports an alarm when the

detection rule is triggered.

Go to Setup > Intelligent > Smart.

Select Human Body Detection and click to configure it.

Add a snapshot area.

(1) Click . The snapshot area is a hexagon by default. Only one snapshot area is allowed.

Bekijk gratis de handleiding van UniView IPC3638SE-ADF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.