UniView IPC2228SE-DF40K-WL-I0 Handleiding (135 Pagina's)

Handleiding

49

Set auto-switching conditions, including schedule, illumination and PTZ elevation. Auto switching

can only be triggered when all the set conditions are met.

Set the scene as the default scene.

(Optional) Enable auto switching.

 When enabled, if the conditions for switching to a non-default scene are met, the camera will

automatically switch to the scene; otherwise, the camera uses the default scene.

 After you select the Enable Auto Switching check box, all scene parameters cannot be configured.

 If multiple non-default scenes meet the switching condition at the same time, the camera will switch

to the scene with the minimum number (starts from 1 to 5).

2. Image Enhancement

On the Image page, click Image Enhancement.

Set the image enhancement parameters.

Item Description

Brightness

The overall lightness or darkness of the image.

Low brightness High brightness

Bekijk gratis de handleiding van UniView IPC2228SE-DF40K-WL-I0, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.