UniView HC121ATS8CR-Z handleiding
Handleiding
Je bekijkt pagina 31 van 135
26
You can use the defaults or customize them in case of port conflicts.
CAUTION!
•
If the HTTP port number you entered has been used, a message “Port conflicts. Please try again.”
will appear. 23, 81, 82, 85, 3260, and 49152 have been assigned for other purposes
and cannot be
used.
•
In addition to the above port numbers, the system can also dynamically detect other port numbers
that are already in use.
HTTP/HTTPS Port: If you change the HTTP/HTTPS port number, then you need to add the new port
number after the IP address when logging in. For example, if the HTTP port number is set to 88, you
need to use http://192.168.1.13:88
to log in to the camera.
RTSP Port: Real-Time Streaming Protocol port, enter an available port number.
Click Save.
2. Port Mapping
Configure port mapping so computers on the WAN can access your camera on the LAN.
Go to Setup > Network > Port > Port Mapping.
Enable Port Mapping.
Select the mapping type.
UPnP
Auto: Enable UPnP on the router, then the external port numbers are assigned automatically.
Manual: The external port numbers need to be set manually.
Manual
If your router does not support UPnP, you need to set the external port numbers manually.
Bekijk gratis de handleiding van UniView HC121ATS8CR-Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UniView |
| Model | HC121ATS8CR-Z |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 34525 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 2000 g |
| Breedte | 126 mm |
| Hoogte | 130 mm |
| Soort | IP-beveiligingscamera |
