UniView HC121ATS8CR-Z handleiding
Handleiding
Je bekijkt pagina 30 van 135
25
IPv6
DHCP
By default, the IPv6 mode is set to DHCP. The IP address is automatically obtained from the DHCP
server.
Manual
(1) Set the IPv6 mode to Manual.
(2) Enter the IPv6 address, prefix length and default gateway. Make sure that the IPv6 address is
unique in the network.
Set the MTU value, port type and operating mode.
MTU: Set the maximum packet size supported by the network in bytes. The greater the value, the
higher the communication efficiency, the higher the transmission delay.
Port Type: FE Port by default.
Operating Mode: Auto-negotiation by default.
Click Save.
5.2.2 Port
1. Port
Go to Setup > Network > Port.
Bekijk gratis de handleiding van UniView HC121ATS8CR-Z, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | UniView |
| Model | HC121ATS8CR-Z |
| Categorie | Bewakingscamera |
| Taal | Nederlands |
| Grootte | 34525 MB |
Caratteristiche Prodotto
| Kleur van het product | Wit |
| Gewicht | 2000 g |
| Breedte | 126 mm |
| Hoogte | 130 mm |
| Soort | IP-beveiligingscamera |
