United Office UAV 190 C2 handleiding
Handleiding
Je bekijkt pagina 10 van 144
UAV 190 C2
GB
│
IE
│
7 ■
Operation
Note
You can shred up to 6 sheets (80 g /m
2
paper) at the same time.
ATTENTON!
Remove all paper clips or staples before inserting the paper into the
cutter opening
2
. The cutting blades might otherwise be damaged.
Using auto mode
♦ Set the switch 1 to the AUTO for shredding. The power LED 3 lights up
green. The motor starts automatically as soon you insert paper and switches
off automatically once no further paper is inserted.
Note
► Always insert smaller pieces of paper into the middle of the cutter opening
2.
This is where the contact that starts the cutting process is located.
► If the appliance overheats, the overheat LED
4 lights up as soon as the paper
touches the contact which starts the cutting process. The appliance will not start
cutting. Proceed as described in the section Note regarding overheating of
the appliance.
Clearing a material blockage
♦ Move the switch 1 to the REV (“reverse”) position if the paper being
shredded causes a blockage.
The appliance now goes into reverse and the paper that is being shredded
is ejected.
♦ Pull the paper out of the appliance, then set the switch
1 to AUTO.
♦ The appliance is now ready for use.
Note
► Reverse mode is solely for clearing paper jams. Do not use it for removing
documents that are already half shredded and are not causing a jam.
Bekijk gratis de handleiding van United Office UAV 190 C2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | United Office |
| Model | UAV 190 C2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 10233 MB |
