Unitech PA982 handleiding
Handleiding
Je bekijkt pagina 34 van 43
26
Copyright 2008 unitech Electronics Co., Ltd. All rights reserved. unitech is a registered trademark of unitech Electronics Co., Ltd.
3. If there are networks already detected, double-tap the net-
work name to open the Wireless Properties dialog.
4. Type the SSID in the Network Name text box.
An SSID (Service Set IDentifier) is the name assigned to a
wireless (Wi-Fi) network. All devices must use the same
case-sensitive name to communicate. The name is a text
string up to 32 bytes long.
5. Configure the remaining Wireless Properties, and tap OK.
6. Tap and hold the network name, then tap Connect.
7. When finished, tap OK.
For more information on how to configure the wireless network set-
tings, tap Start ¨ Help.
Using the WiFi Tool
The WiFi tool enables you to get, renew, and release IP addresses, monitor the WiFi signal strength,
and enable RF power saving mode.
1. Tap Start → Programs → Communications → WiFiTool.
The WiFiTool screen appears.
The following tools are available in the utility.
• IP Tab: enables you to assign an IP address to the PA982,
renew an IP address, or release the PA982’s IP address.
• Signal Tab: displays the wireless card’s signal strength, and
enables you to enable logging at specified intervals.
• RF Power Tab: enables you to set the wireless card’s
power saving mode:
– Continuous Access Mode (CAM)
– Fast_PSP Mode
Bekijk gratis de handleiding van Unitech PA982, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Unitech |
| Model | PA982 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3960 MB |
