TV One C2-6204 handleiding
Handleiding
Je bekijkt pagina 68 van 73
66 tvONE
cannot achieve exactly what you desire, then alter the inputs levels in Adjust sources until the correct
colors are restored.
How can I reduce color smearing on CV connections?
Smearing usually occurs on Composite Video connections and is generally unavoidable - unless you can
switch to using S-Video or RGB / YUV connections. It occurs because the brightness and color information
is transmitted as one combined (composite) signal and the two parts must be 'bandwidth-limited' to avoid
them interfering with each other – which then reduces the quality.
I can no longer adjust the Output image resolution.
When the unit is in Lock mode, the output resolution is fixed to be the same as the Lock source input
resolution. During this time the Output image menu item is not displayed.
The picture on the video display is black and white.
Ensure that all the cables are correctly connected. If you are using a PAL TV to display the output then the
unit may be providing resolution set to NTSC mode, or vice versa.
The picture on the video display is green.
The Output type is probably incorrectly set to YUV mode, whereas you are connecting to an RGB monitor
– see Adjust outputs menu.
The RGB input is selected but the image is rolling or pink.
Check the Adjust sources menu and confirm that the input type and sync method is set correctly. (Having
YUV input selected, instead of RGBHV often causes this problem).
The video signal from my DVD player does not appear to work.
Some DVD players have a switch at the back that selects between ‘Component’ and ‘S-Video’ output,
because most will not let you output both at the same time. Make sure it is in the right position for the
output you want.
Image is flashing, snow is present, or source image does not appear.
You may be experiencing a HDCP compatibility problem.
If one of the sources you are using is HDCP encrypted, and your unit is not set to output HDCP, then your
unit will not allow the source image to pass through the unit (it may flash on and off).
The solution (if your unit supports HDCP) is to ensure it is enabled in both ‘Adjust outputs’ and in the
‘Adjust sources’ menu for that source signal.
If you unit does not support HDCP, or your output device does not support HDCP (e.g. an analog monitor),
then there is no way to display a HDCP encrypted source signal.
General troubleshooting checklist
If specific troubleshooting advice isn't helping, or your product has stopped working, go through the
points below. If your product still doesn't work, you might need to return it for repair.
1. Make sure your product is set up correctly, as shown in this guide.
2. Check that your cables and equipment are all connected firmly.
3. Check that your product is connected to an electrical outlet that is switched on.
Can you see LED lights on the front of your product?
4. Test your sources by connecting them directly to a display.
5. Test your display by connecting it directly to a source.
6. Test each cable.
Bekijk gratis de handleiding van TV One C2-6204, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TV One |
| Model | C2-6204 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7375 MB |