TV One C2-6204 handleiding
Handleiding
Je bekijkt pagina 67 van 73
MNL- C2-6204-V3.00 65
Troubleshooting and technical support
If problems are experienced, please read through the symptom topics below to resolve the problem. After
doing so, if you still need to, contact Technical Support at ww.tvone.com/support. Please have the
following details of the problem handy:
Whether the problem happens only at specific times or has only just started occurring (and what other
things have changed at the same time).
Firmware revision numbers - found in the first item of the System menu:
If the problem relates to a specific source or resolution:
There is no picture on the Output.
If no LEDs are on, then ensure that the AC power adaptor is connected properly and the power switch is
on at the AC outlet.
If the Standby/ON LED on the unit is off but another blue LED is active, then check that the monitor output
from the computer is connected at both the computer and the unit. Check that the output connector you
are using from the unit is also connected at the unit and the display equipment.
Check that the display video equipment is set to the correct line input and format/standard as
appropriate.
Check that the device connected to the output is on and can support the resolution set in the Adjust
output menu, ensuring that the Sync type e.g. RGBHV, is also set correctly.
The image is shifted and not fully viewable
There are several ways to correct this, depending on the actual problem, although it’s generally best to
perform a Factory reset.
Try an AUTOSET if the input is RGB or YUV/YCbCr. Next adjust the TL pos. adj. values in the Setup
Program source menu until the incoming video signal is displayed correctly. You may also need to adjust
the BR size adj. setting to ensure the incoming video signal is properly displayed.
The output resolutions no longer appear as expected.
Because any changes made in the Adjust resolutions menu are automatically stored, it may be that the
resolution data has become altered or corrupted beyond the ability of a display to show it.
Either manually correct the resolution data, or restore the data to full factory conditions by doing a
firmware update. The user should avoid altering the resolution parameter data unless necessary.
There is excessive flicker on the Output.
Try using a different Flicker reduction mode. Turning the contrast down and the brightness up on the
output device can have a large effect on flicker. Or try adjusting the brightness and contrast of the source
input by selecting the Input adjust menu.
The Output image is distorted.
This may occur where some of the areas of the image are very dark and others are very bright. The
solution is to adjust the contrast and brightness settings on your Output device to rectify the problem.
Alternatively, if the Adjust resolutions menu has been used to the output resolution in question, a
firmware update is recommended to perform a FULL factory reset.
Some colors appear to be incorrect on the CV/YC output
First try altering the color, contrast and brightness settings on your TV or video display. These are usually
set up for a very different reason than viewing computer graphics and may need changing to suit. If you
Bekijk gratis de handleiding van TV One C2-6204, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | TV One |
| Model | C2-6204 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7375 MB |