Turbo Air STI130MR448A2 handleiding
Handleiding
Je bekijkt pagina 24 van 33
24
A ALARM PARAMETERS
A0 alarm and fan temperature diff erential C -20 +20 ℉ 2 2
AL low temperature alarm threshold/deviation ( AL= 0 : alarm disabled ) F -50 +250 ℉ 0 0
AH high temperature alarm threshold/deviation ( AH= 0 : alarm disabled ) F -50 +250 ℉ 0 0
Ad low and high temperature alarm delay C 0 199 min 0 0
A4
digital input configuration
0 : input not active
1 : exter. alarm, instant (A7=0) or delayed (A7>0)
2 : enable defrost (open=disabled)
3 : start defrost on closing
4 : curtain switch or night-time operation (open=normal set point)
5 : remote ON/OFF (open=OFF)
6 : AUX output control [H1=3] (open=AUX de-energised)
7 : AUX output [H1=3]+FAN OFF control (closed)(open=AUX energised)
8 : AUX output [H1=3]+FAN OFF control (closed) + COMP. OFF control
(closed) (open=AUX energised)
9 : select direct/reverse operation
r3=0 → open=direct + defrost, closed=reverse
r3=1/2 → open=direct, closed=reverse
10 : condenser probe
11 : product probe
C 0 11 - 0 0
A7 external alarm detection delay C 0 199 Min 0 0
A8 enable alarm ”Ed” : end defrost by timeout (1 = enabled) C 0 1 - 0 0
Ac high condenser temperature alarm C -50 +250 ℉ 150 150
AE high condenser temperature alarm differential C 0.1 20.0 ℉ 10 10
Acd high condenser temperature alarm delay C 0 250 min 0 0
F FAN PARAMETERS
F0 fan management (0 = fans on, 1 = controlled based on parameter F1) C 0 1 - 0 0
F1 evaporator fan control set point F -50 +130 ℃/℉ +5 +5
F2 fans OFF when compressor OFF ( 0=ON , 1=OFF ) C 0 1 - 0 0
F3 evaporator fan status during defrost (0: FAN ON, 1: FAN OFF) C 0 1 - 1 0
Fd post-dripping time F 0 +15 min 2 0
H OTHER SETTING
H0 serial address C 0 199 - 1 1
H1
AUX output confi guration
0 : no function associated with the output
1 : alarm output usually energized
2 : alarm output usually de-energized
3 : auxiliary output driven by digital input [A4=6/7/8]
digital input OPEN = AUX de-energised
digital input CLOSED = AUX energised
C 0 1 flag 1 1
H2 enable keypad (0=disabled, 1=enabled, 2=enabled except for ON/OFF) C 0 2 flag 1 1
H4 disable buzzer (0=enabled, 1=disabled) C 0 1 - 0 0
H5 key ID code from supervisor F -99 +99 - 1 1
EZY select Easy Set according to the model C 0 4 - 1 3
Bekijk gratis de handleiding van Turbo Air STI130MR448A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Turbo Air |
| Model | STI130MR448A2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2961 MB |
