Turbo Air STI130MR448A2 handleiding
Handleiding
Je bekijkt pagina 23 van 33
23
Listing of Controller Parameters and Settings.
Codes Description Type Min Max UOM
Defaults
Low temp. Med temp.
PS password F 00 +199 - 22 22
/ PROBE PARAMETERS
/2 probe measurement stability C 1 15 - 4 4
/4 select probe displayed F 1 3 1 1
/5 select ℃/℉ (0=℃, 1=℉) C 0 1 flag 1 1
/6 disable decimal point C 0 1 flag 0 0
/7 enable probe 2 alarm (model M only) C 0 1 0 0 0
/C1 probe 1 calibration F -50 +50 ℉ 0 0
/C2 probe 2 calibration F -50 +50 ℉ 0 0
/C3 probe 3 calibration F -50 +50 ℉ 0 0
r CONTROL PARAMETERS
St control temperature set point S r1 r2 ℉ -10 38
r1 minimum set point value C -50 r2 ℉ -30 35
r2 maximum set point value C r1 150 ℉ +30 50
r3 select operating mode ( 0=direct+defrost , 1=direct , 2=reverse ) C 0 2 flag 0 0
r4 automatic night-time set point variation C -50 +50 ℉ 0 0
rd control differential F 0 19 ℉ 2 2
c COMPRESSOR PARAMETERS
c0 compressor and fan start delay on power-up C 0 100 min 0 0
c1 minimum time between consecutive compressor starts C 0 100 min 0 0
c2 minimum compressor off time C 0 100 min 4 4
c3 minimum compressor on time C 0 100 min 0 0
c4 compressor on time with duty setting C 0 100 min 0 0
cc continuous cycle duration C 0 15 hours 4 4
c6 temperature alarm bypass after continuous cycle C 0 15 hours 2 2
d DEFROST PARAMETERS
d0
type of defrost
( 0 = heater by probe, 1 = hot gas by probe, 2 = heater by time,
3 = hot gas by time, 4 = heater by time with temp. control )
C 0 4 flag 0 2
dI interval between defrosts F 0 199 hours 6 6
dt end defrost temperature set point F -50 +130 ℉ 65 65
dP maximum defrost duration F 1 199 min 60 40
d4 defrost when the instrument is switched on (0=no, 1=yes) C 0 1 flag 1 0
d5 defrost delay on power-up or when enabled by digital input C 0 199 min 0 0
d6 disable temperature display during defrost (0=no, 1=yes) C 0 1 flag 1 1
dd dripping time F 0 15 min 2 1
d8 alarm bypass time after defrost F 0 15 hours 1 1
d9 defrost priority over compressor protectors (0=no, 1=yes) C 0 1 flag 0 0
d/ display defrost probe temperature F ℉ - -
dC time base ( for defrost only : 0 = hr/min , 1 = min/s ) C 0 1 flag 0 0
Bekijk gratis de handleiding van Turbo Air STI130MR448A2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Turbo Air |
| Model | STI130MR448A2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2961 MB |
