Tunturi FitRow 90i handleiding

Niet gecategoriseerd

Tunturi

64 pagina's

PDF beschikbaar

Handleiding

Assembly Instructions

Installing the Seat and Rear Leg to Seat Rail

STEP 1

REQUIRED

Seat Rail [2]

Seat [3]

Rear Leg [4]

Internal Seat Rail Bolt Bracket [6]

Rear End Cap [5]

Rear Rubber Bumpstops [9]

2x M10 Washers [11]

2x M10x120mm Bolts [14]

A) Install the Seat[3] onto the Seat Rail[2] as shown, with seat

indentation facing rearward.

Do not tighten.

Step 2: Make sure the rear

leg has the resistance hooks

facing towards the inside

of the machine before you

begin assembly.

Step 3:Use care when

tightening Bolts to avoid

scratches.

WARNING

Indentation

Seat Rail

Rear End Cap

..........................................................................................................................................................

Rear Rubber Bumpstops

B) First insert the Internal Seat Rail Bolt Bracket[6] into the rear of

the Seat Rail and align it to the second hole from the rear of the

rail. Then use 2x M10x120mm Dome Head Bolts[14] and 2x

M10 Washers[11] install the Rear Leg[4] to the Seat Rail.

M10 Washer

M10 x 120mm Bolts

Internal Seat Rail Bolt Bracket

Rear Leg

C) Install Rubber End Cap[5] and hold the End Cap in place, thread

the Rear Rubber Bumpstops[9] onto the end. Then tighten both

Bolts to complete Rear Leg assembly.

Bekijk gratis de handleiding van Tunturi FitRow 90i, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.