Tryton TJV20 handleiding
Handleiding
Je bekijkt pagina 8 van 56
8
« »Never dispose of batteries in water.
«Read this instruction before switching on the
power supply and starting the work.»
« »Never dispose of batteries in fire.
«
»
Protect the battery against heat, e. g., against
continuous intense sunlight.
« »For indoor use only.
ź The practical fastener (6) can be used for attaching the drill-driver on
must be kept clean and protected from moisture and dust. The storage
conditions should prevent potential mechanical damage and impact of
the user's belt, both for right-hand and left-hand dominant users.
the weather conditions.
ź The drill/driver is equipped with an auxiliary light (11) for the area of
CAUTION: Remember to always disconnect the battery from the tool prior
drilling/driving, which turns on after the appropriate switch (10) is
to starting the cleaning operations and unplug the charger from the outlet.
pushed.
The charger may be cleaned exclusively with use of a dry cloth. Use also a
n Installation and removing drills to/from the keyless chuck
clean cloth to clean regularly the ventilation openings of the tool to keep
CAUTION: Disconnect the battery from the driver or put the rotation
them patent. From time to time disassemble the grip and remove dust
direction switch (5) in the middle position to secure the machine from being
and other rubbish from the interior.
started by mistake, which could in turn cause harm to the user.
The tool housing must be cleaned with use of a moistened cloth small
When the tool trigger (10) is released the drill chuck is locked. It enables
quantity of soap and then wiped dry. Do not use any detergents or
quick, easy and convenient replacement of a working tool installed in the
solvents as they can damage parts made from plastics. After cleaning let
drill chuck. To remove a drill (or a working bit) from the drill chuck, rotate
the tool dry completely before it is used again.
the chuck ring anticlockwise to expand the opening of the chuck. Insert a
new drill (or a working bit) into the chuck and rotate the chuck ring
TRANSPORTATION:
Store and transport the tool in its transport box to protect it against
clockwise to secure the drill in the drill chuck.
humidity, dust penetration and small objects; remember to protect its
Drills (or other working bits) must be moved to the full depth of the chuck
ventilation openings. Small objects after getting into the casing can
opening.
result in damage to the motor.
n Drilling boreholes
If the battery is removed for transport or storage, make sure the contacts
1. When drilling in concrete, stone or walls hard alloy drill bits should be
will not short circuit. Remove metal items such as screws, nails, clasps,
used.
loose bits, wires, or metal filings from the case or transport container or
2. To drill deep boreholes carry out your job gradually, drill to lower
otherwise prevent them from touching the battery.
depths and remove the drill from the borehole from time to time to
MANUFACTURER:
remove borings from the borehole.
PROFIX Co.Ltd.,
3. To drill large diameter boreholes it is recommended to start with
34 Marywilska Street,
drilling a low-diameter borehole and then expand it to the desired
diameter. It prevents the tool from overloads.
03-228 Warsaw, POLAND.
4. When the drilling bit is seized during working switch immediately
This appliance is in conformity with national and European standards as
tool off to prevent it from being damaged. Switch the rotations
well as with general safety guidelines.
direction to the anticlockwise rotations and then remove the drilling
NOTE: In case of technical issues, contact an authorised technical service.
bit from the borehole.
Any repairs are allowed to be carried out exclusively by qualified staff with
5. Keep the drill aligned with the axis of the borehole. The drilling bit
use of original spare parts.
must be positioned perpendicularly to the surface of the machined
PICTOGRAMS:
material. When the perpendicularity fails to be maintained the
drilling bit may be seized or broken or, under extreme circumstances,
Explanation of the icons located on the nominal plate and the
information tags:
the operator may be injured.
Rotation speed of the drill spindle is controlled by the force the power
switch is depressed with.
n Driving screws
It is recommended to drill the pilot borehole first. The pilot borehole must
be a little deeper and with a less diameter than the outer diameter of the
screw thread. When the screw is to be driven within the vicinity of the
material edge the pilot borehole prevents from undesired chipping of the
material.
If the screw is driven with abnormal difficulty the screw must be retracted
and the pilot borehole diameter should be enlarged.
Anyway, when problem to drive the screw in persists (e.g. in case of hard
wood grades) try to use a lubricating agent (e.g. liquid soap). Press the
tool to the screw with sufficient force to avoid spontaneous rotation of the
driving bit in the screw head. Use only those bits that accurately match
the bit head. When the screw head is damaged further driving the screw
PROTECTION OF THE ENVIRONMENT:
in or out may prove infeasible.
NOTE: The symbol nearby denotes that old equipment must
STORAGE AND MAINTENANCE:
never be thrown away together with other waste (with the
The tool in principle does not require any special maintenance or service.
penalty of a fine). Hazardous components of electronic
The tool must be stored in a place that is not accessible to children and
equipment may adversely affect the natural environment and
Bekijk gratis de handleiding van Tryton TJV20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tryton |
| Model | TJV20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11694 MB |
