Handleiding
Je bekijkt pagina 10 van 20
TVM - TRUE VISUAL MERCHANDISER www.truemfg.com
TEC_TM_152 | REV. A | EN09/23/2021 Page 10 of 20
Cabinet Setup (cont.)
Solid Shelves
1. Install the shelf support bracket.
2. Lift the back of the shelf up. Position the shelf over the shelf
support brackets. See fig. 5.
3. Carefully lower the back of the shelf and slide the shelf under
the shelf support tab. See figs. 5 and 6.
4. Repeat steps 1-3 as needed.
Wire Shelves
1. Install the shelf support bracket.
2. Lift the back of the shelf up. Position the shelf over the shelf
support brackets. See fig. 7.
3. Carefully lower the back of the shelf support and slide the shelf
under the shelf support tab. See fig. 7.
4. Snap the wire shelf into the shelf support clips. See figs. 8 and 9.
5. Repeat steps 1-4 as needed.
Fig. 5. Position the shelf while lifting the back of the shelf. Be sure the sides of
the shelf hang over the bracket.
Fig. 7. Position the shelf while lifting the back of the shelf. Be sure the sides of
the shelf hang over the bracket.
Fig. 6. Installed solid cantilever shelf.
Fig. 8. Snap the wire shelf into the clips.
Fig. 9. Installed wire cantilever shelf.
Bekijk gratis de handleiding van True TVM-48SL-HC~VM01 BLK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TVM-48SL-HC~VM01 BLK |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 5374 MB |
