True TH-23G~FGD01 handleiding
Handleiding
Je bekijkt pagina 8 van 13
7
TRUE
th models: heated cabinets
www
.truemfg.com
SHELF INSTALLATION:
For Proper Shelf Clip Installation Please
Read The Following Instructions.
STEP 1
Install the top tab of the shelf clip into the proper hole. Push up on
the bottom of the clip. (See image 1).
STEP 2
Bottom tab of the shelf clip will fit tightly. You may need to squeeze or
twist the bottom of the shelf clip to install. (See image 2 & 3).
STEP 3
After installation, the shelf clip will fit snug into the shelf standard.
The shelf clip should not be loose or able to wiggle out of the shelf
standard.
SHELF INSTALLATION TIPS
1. Install all the shelf clips before installing the shelves.
2. Start at the bottom in terms of shelf installation and work your
way up.
3. Always lay the back of each shelf down on the rear clips before
the front.
WARNING!
Do not use pliers or any crimping tools
when installing shelf clips. Altering shelf
clips in any way can lead to shelving
instability.
SETUP
Shelf
Clip
Shelf
Shelf
Pillaster
(I-beam)
Shelf
Standards
STANDARD ACCESSORIES
SHELVING INSTALLATION / OPERATION
SHELF INSTALLATION:
STEP 1
A. Hook shelf clips onto shelf standards. (See illustration).
B. Position all four shelf clips equal in distance from the floor for
flat shelves.
STEP 2
Place shelves on shelf clips making sure all corners are seated properly.
WIRE SHELVES: Wire shelves are oriented so that cross
support bars are facing down.
Installing top tab of shelf clip
1
You may need to squeeze or twist
the bottom of the shelf clip to
install
3
Installing bottom of the shelf
clip
2
Shelf clip installation complete
4
Bekijk gratis de handleiding van True TH-23G~FGD01, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TH-23G~FGD01 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3177 MB |
