Handleiding
Je bekijkt pagina 31 van 44
REFRIGERATED FOOD PREP
TEC_TM_090 | REV. F | EN 01/14/2025 Page 31 of 44
truemfg.com
Maintenance & Servicing (cont.)
Fig. 1. Open the grill assembly door (TPP & TUC/TWT-44/67/93).
Fig. 3. Never brush across the coil fins.
Fig. 4. Verify all blockages have been removed.
Fig. 5. Remove condenser brackets if so equipped.
Fig. 2. Remove rear cover screws (TFP/TSSU/TUC/TWT).
Drain Line Cleaning
WARNING!
Slippery Surface hazard! To prevent slippery surfaces,
clean the clogged hose over a large container.
See fig. 2.
Sharp edges! Coil fins are sharp and metal
components can have sharp edges. Take care
when moving, installing, cleaning, servicing, and
maintaining the appliance to avoid cuts.
Required Tools
Required tools include (but may not be limited to) the following:
• Phillips Screwdriver or Bit Driver
• Drill (optional)
• Tube Brush* (see fig. 1)
• Large Container
*Tube brush must fit in 1/2” (12.7 mm) I.D. drain hose.
Bekijk gratis de handleiding van True TFP-72-30M-D-2-HC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | True |
| Model | TFP-72-30M-D-2-HC |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 13865 MB |
