Tronic IAN 373026 handleiding
Handleiding
Je bekijkt pagina 11 van 46
TCA 3 A1
■ 8
│
GB
│
IE
│
NI
♦ Disconnect your connected device from the car charger adapter once
the device has completed charging.
♦ Unplug the car charger adapter from the vehicle power outlet when
you are finished using it.
ATTENTION
► Never connect the car charger adapter unless you are charging a
device! The car charger adapter also consumes power in standby
mode and therefore must be disconnected from the vehicle socket
after use! Otherwise, the car battery will discharge when the engine
is not running.
Troubleshooting
A connected device does not charge (the operating LED 1 does
not light up white).
♦ No connection to the vehicle socket. Check the connection.
♦ Depending on the vehicle type, it is possible that the ignition has to be
switched on first.
The operating LED
1 goes out after a device has been connected.
♦ The car charger adapter is overloaded and will no longer charge attached
devices. The internal overcurrent protection has been triggered. Discon-
nect all connected devices from the car charger adapter. The white
operating LED 1 lights up immediately and the car charger adapter is
ready for use again.
IB_373026_TCA3A1_LB6.indb 8IB_373026_TCA3A1_LB6.indb 8 01.09.2021 12:35:5701.09.2021 12:35:57
Bekijk gratis de handleiding van Tronic IAN 373026, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tronic |
| Model | IAN 373026 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3263 MB |
