Tronic IAN 373026 handleiding
Handleiding
Je bekijkt pagina 10 van 46
TCA 3 A1
GB
│
IE
│
NI
│
7 ■
Setting up
ATTENTION
► The total power consumption of the devices connected to all the USB
sockets 3 may not be higher than 3.4 A. For each individual USB
socket 3 the current consumption of your device must not exceed
2.4 A. Refer to the instruction manual of your device for more
information.
► The maximum power output of all the USB sockets 3 together is 3.4 A.
The maximum power output of each USB socket
3 is 2.4 A.
♦ Connect the car charger adapter to the 12/24V connection of your
car. This is usually the vehicle socket (cigarette lighter) on the dash-
board of your vehicle. Many vehicles have a second socket by the rear
seats or in the boot. 24 volt batteries are sometimes used in vehicles
such as lorries or boats.
♦ The operating LED 1 lights up white to signal that the car charger
adapter is being supplied with power. The operating LED 1 also lights
up if no device is connected. Depending on the vehicle type, it is
possible that the ignition has to be switched on first.
♦ Connect your device to the car charger adapter. For USB devices,
use the original USB cable of your device for optimal charging.
♦ If you need to, you can switch on your connected device and continue
using it.
NOTE
► Monitor the charging status on your connected device.
IB_373026_TCA3A1_LB6.indb 7IB_373026_TCA3A1_LB6.indb 7 01.09.2021 12:35:5701.09.2021 12:35:57
Bekijk gratis de handleiding van Tronic IAN 373026, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tronic |
| Model | IAN 373026 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 3263 MB |
