Trevi GO 2550 4K handleiding

52 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 14 van 52
14
Trevi
GO 2550 4K
ENG
INSTRUCTIONS FOR USE
1. Insert micro SD card into the port:
Make sure to insert the card with the top side facing the screen. The bottom of the card with the connectors
should be directed towards the front of the camera.
Note: Please choose branded Micro SD card and format it on your computer before use. Neutral cards are not
guaranteed to work normally.
2. Installing and removing batteries
Slide the cover and open the battery compartment.
Insert the battery in the correct position so that the battery +/- battery terminals t into the connectors on the
camera. After inserting the battery, close the cover.
The battery indicator on the screen shows the battery charge level.
To replace the battery, open the battery compartment and remove the battery by pulling its strap. Insert a new
battery and close the cover.
3. Charging
The GO 2550 4K battery can be charged by connecting the device to any USB port on your computer via a
USB cable.
The camera can also be charged in a car using a 5V USB type-C plug charger (not supplied).
The camera can be used for recording even while charging.
4. Turn ON/OFF
Press and hold the MODE button for 3/5 seconds to turn the camera on or o󰀨.
The screen will turn o󰀨 automatically, according to the MENU settings. To turn the screen back on, press the
OK key.
SUGGESTED USES OF MOUNTS
Attach the camera to helmets, parts and equipment using the appropriate accessories.
=
+
+
+
+
+
+
=
=
=

Bekijk gratis de handleiding van Trevi GO 2550 4K, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkTrevi
ModelGO 2550 4K
CategorieNiet gecategoriseerd
TaalNederlands
Grootte12128 MB

Caratteristiche Prodotto

Kleur van het productZwart
Ingebouwd displayJa
Gewicht86 g
Breedte60 mm
Diepte31 mm