Handleiding
Je bekijkt pagina 14 van 20
7. MICROPROCESSOR CONTROL (cont’d)
G SERIES
Page 13
7M - START A DEFROST - MENU SYSTEM:
Defrost can be initiated from the Menu System. Defrost can also be initiated from the Menu System using the short cut
(see section below). The keypad must be unlocked to access the menu system.
• Follow the instructions to enter the customer password and Defrost submenu.
• Press the Enter Key to start the defrost operation.
• The Defrost Symbol will illuminate letting you know defrost is in effect.
• Depending on the settings, the unit may also show “dEF” (see below).
7N - SET DEFROST MODE - MENU SYSTEM:
The Defrost Mode is used to congure the way in which the controller determines when to defrost. The possible settings
are:
• Optimize – Defrost based on the ambient conditions (temp & rH)
• Time – Defrost every X hours (xed interval)
• Schedule – Defrost at specic times
• Count – Defrost every X compressor cycles
Note 1: The user assumes full responsibility for properly conguring the defrost operation
when using the Defrost Schedule feature. The keypad must be unlocked to access the menu
system.
• Follow the instructions to enter the technician password and Settings submenu.
• Use the Minus Key until the Defrost Mode parameter is displayed.
• Press the Enter Key to display the value of the Defrost Mode parameter.
• Press the Modify Key and the value will ash, indicating it is being modied.
• To change the Defrost Mode, press the Plus Key to step through the list of choices:
Optimize, Time, Schedule or Count (see above).
• When the desired setting is reached, press the Enter Key to lock in the value.
7O - SET DEFROST SCHEDULE - MENU SYSTEM:
The Defrost Schedule parameters allow the customer to congure the controller to defrost the unit at specic times. Cus-
tomers can set up to six defrost times. They are all programmed the same way. The parameters set the time the defrost
is to start. The options are similar to the 24-hour clock settings. Note 1: the user assumes full responsibility for properly
conguring the defrost operation when using the Defrost Schedule feature. Note 2: The 24-hour clock must be set for this
feature to operate at the correct time of day. See “Set Date & Time” on page 11. Note 3: The Defrost Mode must be set
to “Schedule” to use the Defrost Schedule feature. See “Set Defrost Mode” on page 12. The keypad must be unlocked
to access the menu system.
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Defrost Submenu
Enter Key
Defrost Symbol
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
Optimize
Time
Schedule
Count
DISPLAY
SYMBOL
DISPLAY
DESCRIPTION
SEt/Settings
Minus (-)
/Previous Key
Defrost Mode
Enter Key
Modify Key
Plus (+)
/Next Key
Bekijk gratis de handleiding van Traulsen G20010, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Traulsen |
| Model | G20010 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 3471 MB |
