Tornado Vortex 13 TS050-W13-U handleiding

Boenmachine

Tornado

42 pagina's

PDF beschikbaar

Handleiding

20 21

CLEANING

1. When floor cleaning operation is

complete, return handle to upright

and locked position and unplug the

power cord. Wrap the power cord

around the hooks on the handle.

2. Move the transport lever to the

DOWN position to remove brushes

from floor.

3. Lift the recovery tank lid and

remove recovery tank. Empty tank

and rinse completely with clean

water. Clean steel wiper blade prior

to re-inserting recovery tank.

Prior to cleaning, ensure unit is OFF and

disconnected from power supply.

CLEANING

Avoid touching the sharp edges of the dirty water

tank as injury to hands can occur.

4. To prevent possible clogging of the

solution lines, empty any unused

solution from the tank, lines and

filter and flush completely with

clean water. Store dry.

5. Release brushes by removing brush

shafts held in by quick release

retaining balls.

6. Remove brushes and wash them

either by dipping in a bucket/sink or

in running water.

Dispose of dirty water in accordance with all local, state,

and federal hazardous material disposal regulations.

Bekijk gratis de handleiding van Tornado Vortex 13 TS050-W13-U, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.