Tornado VCRMCWC handleiding
Handleiding
Je bekijkt pagina 10 van 115
English 10
Place the charging base and power it on.
- Place the charging base in an easy-to-access position for
the robot.
Note :
- Ensure that no objects are placed within 1.5m in front of
the charging base and 0.5m from both sides.
- Do not cover the signal transmitting area of the charging
base with any object.
- Avoid direct sunlight, which will affect the recharge effect.
2 - Place the charging base on a level, non-slip, hard
surface and against a wall.
Note :
- To avoid recharging failure caused by position change, do
not put the charging base on a carpet or blanket.
- Always connect the charging base to the power supply.
Ensure that it is located in a place with continuous Wi-Fi
network and good network performance.
Note :
- Always keep the charging base plugged in, otherwise the
robot will not return automatically.
- To return to the charging base smoothly after cleaning, it
is recommended to start cleaning from the charging base.
Do not move the charging base during cleaning.
Connect the robot to the charging base and turn it on.
- After connecting to the power supply, attach the robot to
the charging base by aligning the charging contact pins.
The robot will turn on automatically.
Good Wi-Fi coverage
>0.5m
>1.5m
>0.5m
Store the
power cable
in its storage
slot.
Charging
base
Robot
Note :
- When the battery level is insufficient to turn on the robot,
place the robot on the charging base for a period of time,
and the device will turn on automatically.
- If the robot is not on the charging base, press and hold
the power button for 3 seconds to turn it on.
Fully charged.
- Fully charge the robot before first use.
Note :
- It is recommended to charge the robot for at least 4-6
hours before the first use. The robot will not start or return
for recharge without enough power.
Good Wi-Fi coverage
>0.5m
>1.5m
>0.5m
Store the
power cable
in its storage
slot.
Charging
base
Robot
4) Connect to mobile client
Smart Life
Note :
- Make sure your smartphone is running iOS 9.0 (or above)
or Android 5.0 (or above).
- Make sure the 2.4GHz band wireless signal is enabled on
your wireless router, and the signal is strong.
- To ensure better connection quality, please turn on the
Bluetooth of your mobile phone.
Download the app.
- Search for “Smart Life” application in the app store of the
mobile phone. Then download and install it.
Reset Wi-Fi.
- Press and hold both buttons ( Power button and
Recharge button) at the same time for 3 seconds until you
hear the voice prompt.
The two indicator lights of the robot start to flash slowly,
indicating that the robot is ready for pairing.
Add a device.
- Open the app and follow the prompts to register or log in
to your account.
- Go to the home page of the app. Tap “+” in the upper
right corner of the page to enter the “Add Device” page.
- Follow the on-screen instructions to connect with the
robot.
Note :
- Only the 2.4GHz band is supported for the Wi-Fi
connection.
- Due to the upgrade of the application, the actual
operations may be different from the above description.
Please follow the instructions in the current application.
- If the network distribution fails, please reset the Wi-Fi and
repeat the above operations.
5) Start cleaning
Smart Life
Operation Instructions
4.1 Main Functions
- Turn on/off
- Press and hold Power button for 3 seconds to turn on
the robot. After the power indicator lights up for a period
of time, the robot enters the standby state. Press and hold
Power button for 3 seconds to turn off the robot.
Bekijk gratis de handleiding van Tornado VCRMCWC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | VCRMCWC |
| Categorie | Stofzuiger |
| Taal | Nederlands |
| Grootte | 17004 MB |
