Handleiding
Je bekijkt pagina 4 van 22
English 4
press “Extract” button again or turn the “OFF” position.
7.During working, you can remove the measuring cup
and then add ingredients into the jar through the center
opening of jar cover during operation, and then replace
measuring cup.
NOTE: You’d better not remove the jar from the motor unit
during working process. If it is necessary to remove the jar,
please rstly turn off the appliance to make it stop working
and then remove it.
CAUTION: Do not operate the appliance for more than 3
minutes per time and minimum 30-minute rest time must
be maintained between continuous two cycles.
8.After nish making smoothie, the appliance will stop
working automatically and the indicators of three buttons
will turn to blink.
9.Unplug the appliance and then remove the jar from the
motor unit, carefully remove the jar cover, then pour and
serve.
CAUTION: The appliance must be unplugged before
removing the jar.
ICE CRUSH
1. Lay the appliance on a at horizontal surface and make
sure it is unplugged and turns to “OFF” position before
operating.
2.Make the jar be dried naturally and prepare 8 pieces of
solid ice cubes with a size of 15mm*15mm*15mm, then
remove the measuring cup and jar lid, after it, put the
ice cubes into the jar. Usually certain amount of puried
water has to be added to facilitate the smooth running
of appliance. The proportion of the ice and water is 2:3.
The amount of mixture should not exceed the maximum
level as indicated on the jar. Follow the recipe as below
to operate.
Recipe Ingredient Operation
Ice
crush
Solid ice cube:
8pcs, -18℃,
15*15*15mm
Select the “Ice crush”
setting to operate.
3.Close the jar lid and measuring cup well in position. The
jar lid must be closed well in position, or the appliance can
not be activated.
4.Install the jar onto jar base, make sure that the jar is
installed well in position.
5.Connect the appliance with power source.
6.Turn to “OFF” position, and the indicators of ve
buttons blink. And then press “Ice crush” button, its
corresponding indicator lights solidly, then the appliance
starts to work.
NOTE: The speed can not adjusted by the “Speed knob”
when the appliance is running under the “Ice crush”
mode.
NOTE: During the working process of crushing ice, if you
want to make the appliance stop working, you can press
“Ice crush” button again or turn to “OFF” position.
7. During working, you can remove the measuring cup
and then add ingredients into the jar through the center
opening of jar cover during operation, and then replace
measuring cup.
NOTE: You’d better not remove the jar from the motor unit
during working process. If it is necessary to remove the jar,
please rstly turn off the appliance to make it stop working
and then remove it.
CAUTION: Do not operate the appliance for more than 3
minutes per time and minimum 30-minute rest time must
be maintained between continuous two cycles.
8. After nish crushing ice, the appliance will stop working
automatically and the indicators of three buttons will turn
to blink.
9. Unplug the appliance and then remove the jar from the
motor unit, carefully remove the jar cover, then pour and
serve.
CAUTION: The appliance must be unplugged before
removing the jar.
NOTE: Before cleaning, make sure the appliance is
unplugged and turns to “OFF” position.
1. The Auto-clean feature can help to clean the blender
and blade assembly easily and rapidly in complete safety.
Follow the operation of (1)-(4) as below to perform the
auto-clean function.
(1) After use, reassemble the jar and pour about 400-
500ml warm water into it.
(2) Turn to “OFF” position, and the indicators of three
buttons blink. And then press the “Clean” button once, its
corresponding indicator lights solidly, then the appliance
starts to perform auto cleaning.
(3) After nish cleaning, the appliance will stop working
automatically and the indicators of three buttons will turn
to blink.
(4) Unplug the appliance and then remove the jar from the
motor unit, then rinse the jar under running water.
2. Wiping the outer surface of motor unit with a damp cloth,
do not use abrasive cleansers. Never immerse in water or
other solution for cleaning.
3. All parts except the motor unit are dishwasher-safe. You
can also wash the parts, except the motor unit, in warm,
soapy water.
4. Dry all parts and then reassemble them again. But store
the appliance with the jar lid not be closed completely to
allow air to circulate and prevent jar odors.
5. If any problem has been encountered during use, never
disassemble the Motor Unit by yourself, there are no user
serviceable parts inside. Contact only the authorized
service facility for examination and repair.
WARNING:
(1) The blade is very sharp, handle carefully when clean.
(2) Do not use abrasive cleaners. Never immerse the
Motor Unit in water for cleaning.
Cleaning and Maintenance
Bekijk gratis de handleiding van Tornado TBL-1402E-GS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | TBL-1402E-GS |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 2763 MB |
