Handleiding
Je bekijkt pagina 3 van 22
English 3
3. Close the jar lid and measuring cup well in position.The
jar lid must be closed well in position, or the appliance can
not be activated.
4. Install the jar onto jar base, make sure that the jar is
installed well in position.
5. Connect the appliance with power source.
6. After switching on the “OFF”,rotate the selection gear to
start the machine.
NOTE: The buttons of “Smoothie”, “Clean” “Extract”
and “Ice crush” are invalid when the appliance is running
under the selected speed setting or “Pulse” setting.
7. During working, you can remove the measuring cup
and then add ingredients into the jar through the center
opening of jar cover during operation, and then replace
measuring cup.
NOTE: You’d better not remove the jar from the motor unit
during working process. If it is necessary to remove the jar,
please rstly turn off the appliance to make it stop working
and then remove it.
CAUTION: Do not operate the appliance for more than 3
minutes per time and minimum 30-minute rest time must
be maintained between continuous two cycles.
8. Turn the “Speed knob” to “OFF” position once the
mixture has been blended to your desired consistency.
9. Unplug the appliance and then remove the jar from the
motor unit, carefully remove the jar cover, then pour and
serve.
CAUTION: The appliance must be unplugged before
removing the jar.
SMOOTHIE
1. Lay the appliance on a at horizontal surface and make
sure it is unplugged and the “Speed knob” turns to “OFF”
position before operating.
2. Put the ingredients into the jar, make sure the amount
of ingredients should not exceed the maximum level as
indicated on the jar. Follow the recipe as below to operate.
Recipe Ingredient Operation
Banana
smoothie
Milk: 1/3 of
rated capacity
Banana: 1/6 of
rated capacity,
cut into 2cm in
length.
Ice cube: 5pcs,
2.5*2.5*2.5cm
White sugar: 2
spoons
1. Keep processing for
60 seconds.
2. Filter the food
processed with a sieve
of 2mm ( shaking and
rinsing the sieve is
allowed).
3. Calculate the
amount of the residual
food which is larger
than 2mm in size, and
the water left in the
residual food should
be removed.
NOTE: Never use hot liquids or run the appliance empty.
3. Close the jar lid and measuring cup well in position. The
jar lid must be closed well in position, or the appliance can
not be activated.
4. Install the jar onto jar base, make sure that the jar is
installed well in position.
5. Connect the appliance with power source.
6. Turn the “OFF” position, and the indicators of ve
buttons blink. And then press “Smoothie” button, its
corresponding indicator lights solidly, then the appliance
starts to work.
NOTE: The speed can not adjusted by the “Speed knob”
when the appliance is running under the “Smoothie”
mode.
NOTE: During the working process of making smoothie,
if you want to make the appliance stop working, you can
press “Smoothie” button again or turn the “OFF” position.
7. During working, you can remove the measuring cup
and then add ingredients into the jar through the center
opening of jar cover during operation, and then replace
measuring cup.
NOTE: You’d better not remove the jar from the motor unit
during working process. If it is necessary to remove the jar,
please rstly turn off the appliance to make it stop working
and then remove it.
CAUTION: Do not operate the appliance for more than 3
minutes per time and minimum 30-minute rest time must
be maintained between continuous two cycles.
8. After nish making smoothie, the appliance will stop
working automatically and the indicators of three buttons
will turn to blink.
9. Unplug the appliance and then remove the jar from the
motor unit, carefully remove the jar cover, then pour and
serve.
CAUTION: The appliance must be unplugged before
removing the jar.
Extract
1.Lay the appliance on a at horizontal surface and make
sure it is unplugged and the “Speed knob” turns to “OFF”
position before operating.
2.Put the ingredients into the jar, make sure the amount
of ingredients should not exceed the maximum level as
indicated on the jar. Follow the recipe as below to operate.
Recipe Ingredient Operation
Egg yolk EGG: 6PCS
1.continuously extract
1minutes
NOTE: Never use hot liquids or run the appliance empty.
3.Close the jar lid and measuring cup well in position. The
jar lid must be closed well in position, or the appliance can
not be activated.
4.Install the jar onto jar base, make sure that the jar is
installed well in position.
5.Connect the appliance with power source.
6.Turn the “OFF” position, and the indicators of ve
buttons blink. And then press “Extract” button, its
corresponding indicator lights solidly, then the appliance
starts to work.
NOTE: The speed can not adjusted by the “Speed knob”
when the appliance is running under the “Extract” mode.
NOTE: During the working process of making smoothie,
if you want to make the appliance stop working, you can
Bekijk gratis de handleiding van Tornado TBL-1402E-GS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tornado |
| Model | TBL-1402E-GS |
| Categorie | Blender |
| Taal | Nederlands |
| Grootte | 2763 MB |
