Tomahawk TFS6H handleiding
Handleiding
Je bekijkt pagina 11 van 40
11
4. ASSEMBLY GUIDE
4.1 Unpacking
5.1.1 Remove the Early Entry Green
Concrete Saw from the package. The saw
should be lied from the center handle on
the roll cage.
4.1.2 Discard or recycle the packing
material per your regional laws. No
diamond cutting blade or skid is included
with the saw.
4.1.3 Purchase the appropriate blade and
skid plate from our website at
www.tomahawk-power.com or your local
Tomahawk Power Construction Product
dealer.
4.2 Handle Assembly
5.1.1 Loosen the bolts (A) at the base of the
handles using a 10mm wrench.
4.1.1 Mount the handles to the back of the
saw’s roll cage (B) with the longer screw and
a 5mm allen wrench.
4.1.1 Connect the base of the handles by
fastening the bolts and washers (C) – secure
the bolts in place with a 10mm wrench.
WARNING
The engine should be switched off during operations described in this chapter unless
otherwise stated. Remove the ignition cable from the spark plug to prevent accidental
engine starting.
Bekijk gratis de handleiding van Tomahawk TFS6H, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Tomahawk |
| Model | TFS6H |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 11562 MB |
