Toa VX-3016F handleiding

275 pagina's
PDF beschikbaar

Handleiding

Je bekijkt pagina 15 van 275
Chapter 2
USING IN THE SIMPLE MODE
2-3
2. FUNCTIONS ENABLED WITH THE SIMPLE MODE
In the Simple mode, easy check of the broadcast audio output is enabled as the minimum setting items required
for the general broadcast can be automatically registered if the unit conguration is entered according to the
new creation wizard.
Only the settings of input sound source output destination, broadcast priority level, and broadcast start method
can be changed.
Sound source from the VX-3000F’s audio input can be broadcast to all zones as BGM, and announcements
can be made to the selected zones from the remote microphone. The control output that is activated in interlock
with the broadcast can be set.
Though the failure detection function is not used in the initial setting, you can change the setting so as to enable
only the device connection status to be detected.
All settings except those described hereinafter remain as initial ones.
Use the network setting as it is as initial one.
Following items cannot be changed as they are not displayed. They remain in the state of initial setting, and
cannot be used.
• Emergency broadcast • Emergency warning broadcast • Standby amplier
• ANC function • VOX function • Timer setting
Also, the settings related to the VX-3000PM, VX-3000CT, and VX-300LO cannot be made.
Though the complicated settings cannot be made in this mode, it is possible to simply complete the setting
because the settable items are narrowed to a part of the general broadcast items.

Bekijk gratis de handleiding van Toa VX-3016F, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.

Productinformatie

MerkToa
ModelVX-3016F
CategorieNiet gecategoriseerd
TaalNederlands
Grootte32280 MB

Caratteristiche Prodotto

Kleur van het productZwart
Gewicht7900 g
Breedte482 mm
Diepte345 mm
Hoogte132.6 mm