Toa VX-3000CT handleiding
Handleiding
Je bekijkt pagina 23 van 130
2-7
Chapter 2
INDICATOR STATUS OF CONTROL PANEL AND REMOTE MICROPHONES
Status indicator Selection indicator
Function key
(Intended control output [level] key)
1.9. Indicator State at the Time of Intended Control Output (Level)
When the intended control output (level) function is assigned to the function key, the preset control output is
turned ON while this key is held down. It is turned OFF when this key is released.
When an intended control output (level) function has been assigned to a function key, the 2 indicators to the left
of the key indicate its selection and control statuses.
Note
Operation may become invalid even if you press the function key when the status indicator is lighting.
This is such a case when the Control output pattern is being activated by other Event.
Wait until the status indicator goes off, then press the function key again.
Function key operation is always active as long as the status indicator is unlit.
Indicator meanings are as follows:
Indicator Status Meaning
Selection indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed
(as long as it is pressed)
Status indicator Unlit When the Control output pattern assigned to this function key is not
activated
Lights yellow
When the Control output pattern assigned to this function key is being
activated
1.8. Indicator State at the Time of Intended Control Output (Pulse)
When the intended control output (pulse) function is assigned to the function key, pressing this key turns ON
the preset control output. It is turned OFF when this key is pressed again.
When an intended control output (pulse) function has been assigned to a function key, the 2 indicators to the
left of the key indicate its selection and control statuses.
Note
Operation may become invalid even if you press the function key when the status indicator is lighting.
This is such a case when the Control output pattern is being activated by other Event.
Wait until the status indicator goes off, then press the function key again.
Function key operation is always active as long as the status indicator is unlit.
Status indicator Selection indicator
Function key
(Intended control output [pulse] key)
Indicator meanings are as follows:
Indicator Status Meaning
Selection indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed
Status indicator Unlit
When the Control output pattern assigned to this function key is not
activated
Lights yellow
When the Control output pattern assigned to this function key is being
activated
Bekijk gratis de handleiding van Toa VX-3000CT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | VX-3000CT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14157 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 3000 g |
| Breedte | 482 mm |
| Diepte | 315.2 mm |
| Hoogte | 44 mm |
