Toa VX-3000CT handleiding
Handleiding
Je bekijkt pagina 22 van 130
2-6
Chapter 2
INDICATOR STATUS OF CONTROL PANEL AND REMOTE MICROPHONES
1.7. Indicator State at the Time of Intended Control Input
When an intended control input function has been assigned to a function key, the 2 indicators to the left of the
key indicate its selection and control status.
Note
Operation may become invalid even if you press the function key when the status indicator is lighting.
This is such a case when the control input is placed in Active state by other device.
Wait until the status indicator goes off, then press the function key again.
Function key operation is always active as long as the status indicator is unlit.
Indicator Status Meaning
Selection indicator Unlit
When the function key is not pressed
Lights green
When the function key is pressed
Status indicator Unlit
When the control input assigned to this function key is in Inactive* state
Lights yellow
When the control input assigned to this function key is in Active* state
* When the control input polarity is set to "NO" in the Event setting, the function key becomes Active while the
control input is closed, and becomes Inactive when it is open.
Conversely, when the polarity is set to "NC," the function key becomes Active while the control input is open,
and becomes Inactive when it is closed.
Indicator meanings are as follows:
Status indicator Selection indicator
Function key
(Intended control input key)
Bekijk gratis de handleiding van Toa VX-3000CT, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Toa |
| Model | VX-3000CT |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14157 MB |
Caratteristiche Prodotto
| Kleur van het product | Zwart |
| Gewicht | 3000 g |
| Breedte | 482 mm |
| Diepte | 315.2 mm |
| Hoogte | 44 mm |
